I have NUT upsmon 2.7.2 installed on an OrangePi One running Armbian 5.25 (which is Debian jessie). It is setup to monitor my Tripp Lite SmartOnline SU3000RTXLCS2U using the usbhid-ups driver and communicate to the server when it should shutdown or power up. I can successfully get my UPS information running the
upsc command, so I thought all was working well.
One issue I cant figure out is why my UPS reboots (and cuts power to everything connected to it) when I issue a reboot command to the OrangePi. I can send it a shutdown command and it shuts down without messing with the UPS. When I run the
upsc command, I can see:
ups.timer.reboot: 0 ups.timer.shutdown: -1 ups.timer.start: 0 ups.vendorid: 09ae ups.watchdog.status: 0
My guess was that the upsmon server sends the UPS the reboot command before the service stops. I see that
ups.timer.shutdown: -1 which makes me think that the UPS is set to ignore shutdown commands, and
ups.timer.reboot: 0 means that the UPS is set to reboot immediately on receiving a reboot command. Is this correct? Do I need to set
ups.timer.reboot: -1 or something? And how would that be done?