0

I have installed and configured SCCM, but, I'm getting the following error;

Booting from filename "SMSBoot\x64\wdsnbp.com" tftp://192.168.100.x/SMSBoot%5cx64%5cwdsnbp.com. File not found (0x2d12603b) Could not boot from filename "SMSBoot\x64\wdsnbp.com": File notfound (0x2d12603b) No more network devices

I've tried the steps given above, where unchecking of PXE and checking it back on is mentioned. But, it didn't work for me.

Any suggestion / link would be appreciated which could get me out it this situation. :)

Improve this question
3
  • Is your windows firewall allowing access? Can you download the boot file from a machine with a TFTP client installed?
    – Tim Brigham
    Jul 13, 2017 at 17:44
  • Thanks Tim for a quick reply. Yes, the firewall is disabled. I am still unable to make it work. The DHCP server is providing IP to the machine on boot. But, when it tries to access 192.168.100.x/SMSBoot%5cx64%5cwdsnbp.com, it says that the File not found.
    – Mubeen Wahab
    Jul 14, 2017 at 13:54
  • I tried using the linux tftp client and accessed the location mentioned above, and it reflect with, "Error code 4: Transfer mode not supported"
    – Mubeen Wahab
    Jul 14, 2017 at 14:05

1 Answer 1

Reset to default
0

do you realize that the address is not valid? tftp://192.168.100.x/SMSBoot%5cx64%5cwdsnbp.com

192.168.100.x this is not a TFTP server address...

You should try a Wireshark traffic capture and see what PXE info the DHCP server is really providing and what is the PXE client really requesting.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .