1

Currently I have the following setup

Windows IP Configuration

Host Name . . . . . . . . . . . . : workhorse
Primary Dns Suffix . . . . . . . : AVIAF.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : AVIAF.local

Ethernet adapter Internal Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client)
Physical Address. . . . . . . . . : 00-19-B9-E0-64-63
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.211
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.211
Primary WINS Server . . . . . . . : 192.168.0.211
Secondary WINS Server . . . . . . : 192.168.0.1
Ethernet adapter External Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #2
Physical Address. . . . . . . . . : 00-19-B9-E0-64-65
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 173.65.167.75
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 173.65.167.1
DNS Servers . . . . . . . . . . . : 68.238.0.12
Primary WINS Server . . . . . . . : 192.168.0.211
Secondary WINS Server . . . . . . : 192.168.0.1

I get error messages that pop up saying that dual gateways doesnt work for internal and external ... If I dont do that then one of the two network cards (the one without the gateway) stops responding to web calls



What is the correct way to do this?

Improve this question
2

The "correct" setup would usually be to have a default gateway on the external network interface and not having one on the internal one, but it can vary depending on your network configuration.

What do you mean by "stops responding to web calls"?
Web calls from where?
From the same network the card is connected to?
From another network reachable through that one?
From a proxy server?

Improve this answer
3
  • Stops Responding to web calls means that I have IIS running websites that are both internal and external facing... if i turn off the gateway for lan internal then the local users cant access. If I turn off the gateway for the external then the internet users can't access. They are two network cards built in to the mother board of a dell 1950
    – MarkKGreenway
    Nov 25 '09 at 20:41
  • Also no proxy servers anywhere... Its Fiber -> switch -> switch -> External Card and Fiber -> switch -> router -> internal card
    – MarkKGreenway
    Nov 25 '09 at 20:42
  • 1
    This is strange, the server should be able to properly talk to the network(s) it's directly connected to even without any defined gateway. Are you really saying that an internal computer with an address like 192.168.1.42 can't talk to your server if it doesn't have a default gateway on the internal interface?!?
    – Massimo
    Nov 25 '09 at 21:32

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.