I own a HP DL320e G8 Server. I've disconnected my disc drive, and instead have opted in to install a SSD instead. The SSD is recognised by the system, under the B120i Embedded Raid Controller. I create a logical drive of RAID 0, rescan the system to see if it's completed, and it's all good! After I reboot the system, the system states that no logical drives have been installed on that raid controller. I open up the raid utility, and it shows that no logical drives have been created! What's the issue?
I also have a B220i raid card installed in the system as well, which works perfectly fine with 4 x 3TB drives installed, all under RAID 0, which is not affected by the above.