1

I have upgraded my storage and increased the size of total volume. When I check the extended size in storage management page (MSA2040), it shows everything is alright and its extended.

But when I check from my OS, it still shows the old value.

Size before upgrade was 9.4 TB, size after upgrade is 13.2 TB.

When i df -h, result is;

/dev/sdb                 9.4T  8.4T  1.1T  90% /msa10tb

But when I also list it via parted /dev/sdb print free ;

Model: HP MSA 2040 SAN (scsi)
Disk /dev/sdb: 13.2TB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Disk Flags:

Number  Start  End     Size    File system  Flags
 1      0.00B  13.2TB  13.2TB  xfs

It seems new size is not allocated. How could I allocate and update the size safely? Should I use GParted Live to fix this issue or is there anything you'd recommend me to do?

My OS is Centos 7.4.

Thanks in advance!

Edit - Regarding to @ewwwhite's answer;

fdisk -l /dev/sdb

Disk /dev/sdb: 13180.0 GB, 13179975368704 bytes, 25742139392 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 1048576 bytes
  • What's the output of fdisk -l /dev/sdb ? – ewwhite Jul 24 '18 at 7:31
  • @ewwhite Output added :) – Pelin Canikli Jul 24 '18 at 7:36
3

You just need to grow the XFS filesystem.

In this case, xfs_growfs /msa10tb should work.

  • Is it safe to do it right away to should I completely stop I/O operations first? – Pelin Canikli Jul 24 '18 at 7:36
  • 1
    Yes, the man page would show this. It's an "online resize" and can be done without downtime. You're not using partitions, so you can just run the command I specified in the answer. – ewwhite Jul 24 '18 at 12:50
  • I just went ahead right after you mentioned it's safe and worked like a charm, thanks! Next time I should read man page carefully :) – Pelin Canikli Jul 24 '18 at 13:01
1

You can use growpart utility to resizing the disk.

Exact steps for CentOS are:

$ yum install cloud-utils-growpart
$ growpart /dev/[DEVICE_ID] [PARTITION_NUMBER]
$ xfs_growfs /dev/[DEVICE_ID][PARTITION_NUMBER]
  • Thanks for the answer @Yugendra, same question as above, is it safe with just stoppingthe i/o operations? Or should I do this with being extra cautious? – Pelin Canikli Jul 24 '18 at 7:38
  • 1
    As you are increasing only 4G, it will be quick and will not create any problem but it is always better to take precautions. Also, you should try it on your test system first to get some hands on. – Yugendra Jul 24 '18 at 8:07
  • It looks like the partition has already been resized, but you might need to run partprobe /dev/sdb to make sure the kernel is aware of the new partition size. Then it's time for xfs_growfs. The XFS filesystem is designed to be on-line extendable, and in fact can be extended only while mounted. – telcoM Jul 24 '18 at 8:09

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.