1

I'm unable to sync with ntp server. Any suggestions on how to force the ntpdate to work and sync?

ntp.conf on clients are default with only the server address changed.

ntpdate -dv 10.10.10.10
26 Sep 04:33:56 ntpdate[18934]: ntpdate [email protected] Mon Dec  9 14:35:05 UTC                                                                                                   2013 (1)
Looking for host 10.10.10.10 and service ntp
host found : 10.10.10.10
transmit(10.10.10.10)
receive(10.10.10.10)
transmit(10.10.10.10)
receive(10.10.10.10)
transmit(10.10.10.10)
receive(10.10.10.10)
transmit(10.10.10.10)
receive(10.10.10.10)
transmit(10.10.10.10)
10.10.10.10: Server dropped: Server has gone too long without sync
server 10.10.10.10, port 123
stratum 3, precision -22, leap 00, trust 000
refid [10.10.10.10], delay 0.02588, dispersion 0.00000
transmitted 4, in filter 4
reference time:    ded53aa8.03ff145c  Wed, Jun 20 2018 20:42:16.015
originate timestamp: df558ac2.571e7c56  Wed, Sep 26 2018  4:34:10.340
transmit timestamp:  df558ab4.779ebe9c  Wed, Sep 26 2018  4:33:56.467
filter delay:  0.02611  0.02589  0.02588  0.02591
         0.00000  0.00000  0.00000  0.00000
filter offset: 13.87284 13.87281 13.87281 13.87279
         0.000000 0.000000 0.000000 0.000000
delay 0.02588, dispersion 0.00000
offset 13.872814

26 Sep 04:33:56 ntpdate[18934]: no server suitable for synchronization found
Improve this question

2 Answers 2

Reset to default
3

Note the reference time received back from the server: Wed, Jun 20 2018 20:42:16.015 - that means that the server has not syned with its upstream(s) since that time. ntpdate considers this too long ago and will not sync with that server because it's probably giving bad time. To fix ntpdate you need to fix the server.

Improve this answer
1

I fixed the issue.

Steps:

  • Restarted NTPD server.
  • Edit /etc/ntp.conf on client machine and change line "server 10.10.10.10" to "server 10.10.10.10 prefer".
  • Restart ntp client.
  • Then run ntpdate 10.10.10.10 and it sync's fine.
Improve this answer
1
  • The actions you've taken on the client would have no effect on ntpdate's behaviour; ntpdate and /etc/ntp.conf have no relation to each other. Whatever was wrong, you've masked it with the server restart and it's probably now serving reasonable time to ntpdate.
    – Paul Gear
    Oct 1, 2018 at 23:16

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .