I'm trying to use ovpn on my raspeberry (distr. Raspbian) but it doesn't work: Initialization Sequence is Completed, but my IP doesn't change.
Here is the log:
Fri Nov 9 13:56:19 2018 WARNING: file 'PrivateKey.key' is group or others accessible Fri Nov 9 13:56:19 2018 OpenVPN 2.4.0 arm-unknown-linux-gnueabihf [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jul 18 2017 Fri Nov 9 13:56:19 2018 library versions: OpenSSL 1.0.2l 25 May 2017, LZO 2.08 Enter Auth Username: ****************** Enter Auth Password: ****************** Fri Nov 9 13:56:33 2018 TCP/UDP: Preserving recently used remote address: [AF_INET]220.127.116.11:443 Fri Nov 9 13:56:33 2018 UDP link local: (not bound) Fri Nov 9 13:56:33 2018 UDP link remote: [AF_INET]xxx.xx.xxx.x:xxx Fri Nov 9 13:56:33 2018 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Fri Nov 9 13:56:34 2018 [5554/server] Peer Connection Initiated with [AF_INET]xxx.xx.xxx.x:xxx Fri Nov 9 13:56:35 2018 Option 'explicit-exit-notify' in [PUSH-OPTIONS]:3 is ignored by previous <connection> blocks Fri Nov 9 13:56:35 2018 Note: option tun-ipv6 is ignored because modern operating systems do not need special IPv6 tun handling anymore. Fri Nov 9 13:56:35 2018 GDG6: NLSMG_ERROR: error -101 Fri Nov 9 13:56:35 2018 TUN/TAP device tun0 opened Fri Nov 9 13:56:35 2018 do_ifconfig, tt->did_ifconfig_ipv6_setup=1 Fri Nov 9 13:56:35 2018 /sbin/ip link set dev tun0 up mtu 1500 Fri Nov 9 13:56:35 2018 /sbin/ip addr add dev tun0 local 172.18.13.122 peer 172.18.13.121 Fri Nov 9 13:56:35 2018 /sbin/ip -6 addr add fde4:8dba:82e3::101d/64 dev tun0 RTNETLINK answers: File exists Fri Nov 9 13:56:35 2018 ERROR: Linux route add command failed: external program exited with error status: 2
And, if usefull, here is the .ovpn I used:
client dev tun0 proto udp comp-lzo nobind ns-cert-type server persist-key persist-tun reneg-sec 0 dhcp-option DNS 18.104.22.168 dhcp-option DNS 22.214.171.124 redirect-gateway verb 1 auth-user-pass ca CACertificate.crt cert UserCertificate.crt key PrivateKey.key remote ca.lazerpenguin.com 443 cipher AES-256-CBC auth SHA256 keysize 256
It's a similar case than VPN: ERROR: Linux route add command failed with status 2 and someone advised "Try to add the pushed route via ip route add on your guest to check the error and adjust the routing on your host." But I have no idea how to "adjust the routing on my host" ... Does someone have an idea to solve my problem?