0

I need to configure local radius authentication on my cisco router. I have web application in which we have implemented dual factor authentication it works fine with other radius server like freeRadius.

I managed to send Access-Request to the cisco router, but the router always sends back Access-Reject packet.

show running-config

aaa new-model
aaa session-id common

radius-server local
  no authentication mac
  nas 192.168.0.8 key 0 testing_new
  user test2 nthash 0 0CB6948805F797BF2A82807973B89537

!
radius-server host 192.168.0.1 auth-port 1812 acct-port 1813 key testing_new

When I run show radius local-server statistics I get

Successes              : 0           Unknown usernames      : 0
Client blocks          : 0           Invalid passwords      : 0
Unknown NAS            : 16          Invalid packet from NAS: 11

NAS : 192.168.0.8
Successes              : 0           Unknown usernames      : 0
Client blocks          : 0           Invalid passwords      : 0
Corrupted packet       : 0           Unknown RADIUS message : 6
No username attribute  : 1           Missing auth attribute : 0
Shared key mismatch    : 0           Invalid state attribute: 0
Unknown EAP message    : 0           Unknown EAP auth type  : 0
Auto provision success : 0           Auto provision failure : 0
PAC refresh            : 0           Invalid PAC received   : 0

I didn't manage to find a configuration for my case nor I know if it is possible? Any ideas what am I missing in my cisco configuration?

4

You are missing the server. No you can't set the router as a server. Local auth is not RADIUS. The whole point of a RADIUS is to use a different machine for authentication purpose. The IP you set with radius-server host must be that of the RAIDUS server.

Even if your router would somehow support this (some new models support built-in RADIUS server but this is usable only for LEAP), it would not be a recommended practice since most of the commonly used routers barely have enough resources to do their primary tasks. Making one do RADIUS could turn into a significant performance degradation.

If you don't want to use a physical machine you could cheat by turning a wireless AP into a RADIUS server.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.