I cant get the BL460c Gen 8 to work with the 1GB Ethernet Pass-Thru non of the ports are mapped or lighting up.
-
1Do you have a cable in the port on the passthrough module?– ewwhiteMar 30, 2019 at 16:56
-
yes but none of the lights are on– ComputeLabsMar 30, 2019 at 17:23
1 Answer
The blade server's NICs are hardwired to interconnect bays 1 and 2 on a C7000.
For your system, NIC1 in the blade will map to port 1 on the single passthrough module you have.