Title says it all. but here is the scenario:
- Connected to work via VPN
- on a Linux client
- ssh firstname.lastname@example.org
Will going down to "single user mode" via "init 1" kill and disconnect my root ssh session?
Server Fault is a question and answer site for system and network administrators. It only takes a minute to sign up.Sign up to join this community
It should be OK. Whilst the SSH listener daemon is stopped in runlevel 1 on most distros, existing connections should stay up, and networking shouldn't be affected. I wouldn't be doing it without having some sort of remote console connected, though -- you never know when a rogue solar flare is going to come along and drop your network connections for juuuuust long enough to kill your SSH session.
EDIT: Some testing indicates that, on Debian systems at least,
/etc/rc1.d/S30killprocs will take down existing SSH connections (because it's killing off everything). I would be inclined to knobble that script temporarily and do it's job by hand (avoiding the SSH connections) if I were to try to do what you want to do. I'd still prefer to use a remote console, though.
Sorry to bring up after such a long time. I needed answer to this same question. Current answers are wrong for my box. My findings are for Centos 5.11 based install.
The reason ssh client gets disconnected is because
init 1 does something like
service network stop.
What I observe is that and all network interfaces go down and get unconfigured.
ip a and
ifconfig -a confirm this.
init 1 stops
sshd listener process.
It does not stop
sshd child process that holds the session for the connected client.
The ssh session eventually gets dropped due to TCP timeout because network goes down, ssh session does not get killed.
If I bring the network back up
service network start at the console quickly enough
then my clients remain connected even though the box is at runlevel 1.
Question mentions VPN. If the VPN server you are going though is on the box where you doing
then yes, you normally will get disconnected because VPN server by default will NOT run at runlevel 1.
My work around to take system to runlevel 1 without losing ssh sessions, is to temporarily configure required services to continue running at run level 1. All based on Centos 5.11. YMMV. Disclaimer: I would not want to rely on this to work.
# keep network interfaces up chkconfig --level 1 network on # if you are connecting though VPN e.g. OpenVPN running on same server chkconfig --level 1 openvpn on # While at it, might as well keep SSHD running, so you can reconnect chkconfig --level 1 sshd on init 1 # look for messages that indicate that run level has been reached tail -F /var/log/messages # Aug 31 14:21:19 pabx-demo kernel: Kernel logging (proc) stopped. # Aug 31 14:21:19 pabx-demo kernel: Kernel log daemon terminating. # Aug 31 14:21:20 pabx-demo exiting on signal 15
That's it. This allows me to take box to init 1 remotely while remaining in control.
After you are done don't forget to undo the changes:
chkconfig --level 1 network off chkconfig --level 1 openvpn off chkconfig --level 1 sshd off