I have seen working solutions around the issue of forcing Internet traffic to go through the OpenVPN server but they are all done in Linux, all I want to know is how to add an entry to the route table in windows to make this happen. connectivity between the client and server is fine, my Windows 7 client can establish a connection to the Windows 2008 Server, but when established Internet traffic is still going from the local Windows 7 machine. Here are the details:
Server:
Windows 2008 Server with one NIC
OpenVPN IP Address: 192.168.0.1
Local NIC IP Address (connects the server to the Internet): 10.242.69.107
I have seen working solutions around the issue of forcing Internet traffic to go through the OpenVPN server but they are all done in Linux, all I want to know is how to add an entry to the route table in windows to make this happen. connectivity between the client and server is fine, my Windows 7 client can establish a connection to the Windows 2008 Server, but when established Internet traffic is still going from the local Windows 7 machine. Here are the details:
Server:
Windows 2008 Server with one NIC OpenVPN IP Address: 192.168.0.1
Local NIC IP Address (connects the server to the Internet): 10.242.69.107
Client:
Windows 7 with one NIC OpenVPN IP Address: 192.168.86.2
ISP allocated IP Address: 10.0.8.2 (gateway 10.0.8.1)
Server OpenVPN Config:
dev tun ifconfig 192.168.86.1 192.168.86.2 secret static.key push "redirect-gateway def1"
Client OpenVPN Config:
remote xxx.xxx.com dev tun ifconfig 192.168.86.2 192.168.86.1 secret static.key
Output from the client's netstat -rnv
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.0.8.1 10.0.8.2 20
10.0.8.0 255.255.255.252 On-link 10.0.8.2 276
10.0.8.2 255.255.255.255 On-link 10.0.8.2 276
10.0.8.3 255.255.255.255 On-link 10.0.8.2 276
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.0.0 255.255.255.252 On-link 192.168.0.2 286
192.168.0.2 255.255.255.255 On-link 192.168.0.2 286
192.168.0.3 255.255.255.255 On-link 192.168.0.2 286
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 10.0.8.2 276
224.0.0.0 240.0.0.0 On-link 192.168.0.2 286
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 10.0.8.2 276
255.255.255.255 255.255.255.255 On-link 192.168.0.2 286
Can someone please let me know how to add this entry in my server/client route table?
