4

Is it safe to connect a 24 V PoE switch output to an ordinary PC Ethernet input?

  • 1
    What kind of PoE switch? – Moshe Katz Jun 19 at 18:52
6

There are many different manufacturers of network devices, and you didn't say what you are using, but I work with 24V PoE devices from Ubiquiti, so I'll answer based on those. If you are using something else, update the question and I'll update the answer.


No, it is not safe to plug an ordinary PC into a passively-powered 24V PoE switch output. Unlike standard 48V "active" PoE - i.e. 802.3af/at/bt - which checks whether the connected device needs to be powered, the "passive" PoE provided by 24V switches is always on if the port is configured to send power.

It is possible that some devices have current protection built into their network jacks, but that is definitely not something you want to rely on.


In theory, modern network jacks are required to be magnetically coupled instead of directly connected, specifically to prevent voltage spikes on the line from damaging the computer, but in practice this does not always seem to help for 24V Passive PoE.

  • Ethernet jacks are magnetically coupled. However on some non-poe ports the cable-side center taps for the four pairs are shorted together. Apply something like ubiquiti passive PoE to the active pairs on such a port (IIRC with the pairs ubiquiti uses only gigabit ports have active stuff on the relavent pairs) and you are very likely to fry the transformer. – Peter Green Jun 20 at 2:16
  • 1
    @PeterGreen You are correct - Ubiquiti uses pins 4 & 5 for + and pins 7 & 8 for - so it might not matter for non-gigabit devices. I said "in theory" about the magnetics because I remembered this story. – Moshe Katz Jun 20 at 2:48

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.