Questions tagged [debian-jessie]
Debian 8.0 ("Jessie") was initially released on April 26th, 2015. Long term support is available until June 30th, 2020.
297
questions
2
votes
0
answers
323
views
Is it possible to enable FIPS on Debian 8?
Is it possible to enable FIPS on Debian 8?
After googling extensively I could not any reference on how to enable FIPS in Debian 8, which leads me to believe it is not possible.
- 21
0
votes
1
answer
2k
views
Upgrading Debian Jessie to Stretch
I followed this tutorial but failed.
I got a lot of PHP not found found errors after update/upgrade commands, but I continued hoping Stretch would replace the PHP stuff.
Now sudo apt-get update gives ...
- 101
0
votes
2
answers
2k
views
Updating Debian 8 Packages
I've seen lots of threads all with slightly different answers. Tried all I could but I think they're now all outdated.
So we're running Debian 8 (Can't upgrade as it's not our server) the result of ...
- 163
0
votes
1
answer
72
views
ZFS Failed Multiple New Drives
It was decided to replace our aging primary NAS, consisting of three 48 drive SAS expanders of 4TB drives, with a similar system of 12TB drives while reusing some of the newer hardware, one expander ...
- 155
0
votes
0
answers
458
views
Postfix smtpd process not running
I have a server that runs postfix. I noticed recently that even though the service is running and doesn't report any errors, there are some issues with connections.
For example, curl localhost:25 ...
- 917
0
votes
2
answers
3k
views
Can't install docker on Debian 8 Jessie anymore
I installed docker on Debian 8 Jessie before, following this instruction:
apt-key adv --keyserver hkp://p80.pool.sks-keyservers.net:80 --recv-keys 58118E89F3A912897C070ADBF76221572C52609D
echo "deb ...
- 101
3
votes
0
answers
143
views
Track multiple directories with etckeeper
I'm trying to provide a solution to use etckeeper as a keeper of multiple locations (directories). I'm using Debian 8. With the default config etckeeper "watches" the /etc directory but I want to have ...
- 133
0
votes
2
answers
577
views
How to get Apache2 Version 2.4.17 or higher on Debain 8 (Jessie)?
I work with a virtual server, running Debian Jessie (8) and Apache2 in version 2.4.10. Unfortunately it seems that this version of Apache2 is the latest version that is served by the official ...
0
votes
0
answers
174
views
linux gateway using keepalived
pic
Dear, I'm using 2 linux as my gateway of a subnet. Here I want to using keepalived service, But ip routing looked strange. From the router it couldn't find a route to the subnet. Tracerout looked ...
- 1
0
votes
0
answers
22
views
ACCIDENT - just totally lost the permission to my server [duplicate]
I was trying to change a folder owner user from root to jenkins, and accidently did chown on ALL of the filesystem recursively. now I ended up without any permission.
root@vps412690:/# ls
-bash: /bin/...
- 97
0
votes
1
answer
2k
views
Java installation error on Debian 8
I followed the instructions from this website:
https://www.digitalocean.com/community/tutorials/how-to-install-java-with-apt-get-on-debian-8
When I install jre and jdk it says:
Reading package lists....
- 1
21
votes
7
answers
2k
views
How to back up a running Linode server?
We want to take a backup of everything on our Debian server, which is running remotely on the other side of the world (hosted by Linode), without shutting it down.
This system is running shell, email,...
- 311
0
votes
1
answer
2k
views
Amavis : Can't connect to socket 127.0.0.1:* using module IO::Socket::IP: Connection refused
Trying to debug mail server, now I get this error which I feel should be the cause of the server not working :
Mar 17 15:06:24 ks4000003 amavis[2001]: (02001-01) (!)connect to 127.0.0.1:* failed, ...
- 77
0
votes
1
answer
168
views
Do not allow packets of the same size consecutively? iptables
Is it possible to block packets of the same size consecutively?
Example: A 32 size packet is received, not receiving more size 32 packets until another size pack is received.
How could he do it? I ...
2
votes
1
answer
6k
views
SSH Server Public Key Too Small
Customer has vendor who generates a Scan for PCI compliance on their Debian 8 server.
Taken from their report:
DSA keys and RSA keys shorter than 2048 bits are considered
vulnerable. It is ...
- 219
-1
votes
2
answers
243
views
How can I handle a package after giving it PREROUTING? iptables
I currently have these rules:
iptables -A PREROUTING -t nat -p udp -i eth0 -d 168.120.50.119 --dport 8080 -m statistic --mode random --probability 0.33 -j DNAT --to-destination 167.120.10.131:8080
...
4
votes
1
answer
3k
views
Debian jessie upgrade OpenSSH server to latest
I have a Debian 8 server for a customer that is failing a PCI scan, presumably running:
nmap -p 22 -sV customer.edu
which returns
22/tcp open ssh OpenSSH 6.7p1 Debian 5+deb8u7
This should be ...
- 219
1
vote
2
answers
3k
views
UDP packets iptables (possible DDoS)
Debian 8 -
I've been aplying some rules to avoid UDP flood but i'm not sure if they will work, i have the log from my anti-DDoS and it's a very large attack (about 70gbs)
This are the rules i applied ...
- 13
1
vote
1
answer
232
views
When to uncomment server root in apache configuration?
I had a server upgraded from Debian 8 to Debian 9 and there are some odd or different behaviors relating to the hosted website and applications.
I'm going through and looking at various config files ...
- 121
1
vote
0
answers
279
views
Debian Jessie : locales / unmet dependencies
So I've got a VPS and, to be totally honest I have to admit, at some point I did a mess with apt sources and packages. :)
Now I'm trying to get a clean system, almost there, but I still have a little ...
- 131
1
vote
1
answer
218
views
"apt-get update" with new added repo is working but packages are not found when trying to install
I'm trying to install GitLab on a virtual machine running Debian Jessie.
I have added the GitLab repo by running:
curl https://packages.gitlab.com/install/repositories/gitlab/gitlab-ee/script.deb.sh |...
- 153
0
votes
0
answers
1k
views
Invalid number of arguments in rewrite directive on Debian 8
I had a site running on Debian 9 on nginx. Today I did a fresh install of Debain 8 with nginx on same machine but now nginx -t shows following error:
Invalid number of arguments in rewrite ...
- 699
0
votes
1
answer
230
views
What are the specific column headers for the "Mem-Info" dump after "oom-killer"
I'm running a Debian 8 Jessie development server.
16GB mem.
I've looked at the other posts about oom-killer, but none are really pertinent to what I'm asking here
I'm trying to track down what ...
- 515
0
votes
1
answer
202
views
OpenSSL-related linker error while building PHP 5.3.3
While trying to build PHP 5.3.3 on Debian jessie (save yourself some sanity by not asking why) with OpenSSL extension enabled, I encountered undefined reference to symbol 'X509_free@@OPENSSL_1.0.0' in ...
- 213
2
votes
2
answers
4k
views
Clearing "/var/log/journal"
I want to clear my "/var/log/journal" directory.
I'm using debian 8
root@nyc3-x8:/var/log# uname -a
Linux nyc3-x8 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19) x86_64 GNU/Linux
And my ...
- 23
0
votes
2
answers
3k
views
Spring endpoints work with IP but not domain name. How to fix?
I have a Spring Boot application deployed in a VPS. I packaged it as a war and deployed it through the Tomcat manager (<IP>:<Tomcat port>/manager/html).
It works if I access the endpoints ...
- 109
0
votes
1
answer
176
views
Upgrading from Debian 8 (Jessie) to 9 (Stretch)
I am in the process of updating my Debian 8 (Jessie) machine to Debian 9 (Stretch)
Current kernel version is :
# uname -a
Linux host 4.9.0-0.bpo.6-amd64 #1 SMP Debian 4.9.88-1+deb9u1~bpo8+1 (2018-05-...
- 185
0
votes
1
answer
296
views
How to disable TLSv1 in Apache 2.4 (Debian 8)?
I have this line in /etc/apache2/mods-enabled/ssl.conf
SSLProtocol -all +TLSv1.2
However SSL checker whynopadlock still shows this:
Any ideas on how to completely disable TLSv1 in Apache 2.4 (...
- 489
0
votes
1
answer
297
views
Can't update DiG utility on Debian 8 (Jessie)
I am trying to get the latest version of DiG DNS utility (part of BIND 9) but I can't seem to be able to.
I am running Debian 8 (Jessie).
The current DiG version :
root@myMachine:~# dig -v
DiG 9.9....
2
votes
2
answers
19k
views
AH01071: Got error 'Primary script unknown
Debian Linux 8.10, Apache version 2.4.10, FPM/FastCGI.
I have created a 1st virtual host. After hours, I could get it working.
Then I have created another virtual host, with almost the same config =...
- 101
1
vote
1
answer
701
views
phpmyadmin works with http but forbidden with https
I have installed a new dedicated web server, and installed phpmyadmin, and it works.
I have follow a tutorial that helps to secure phpmyadmin i.e. call phpmyadmin thru a subdomain like mysql.mydomain....
- 101
0
votes
0
answers
61
views
Copying files across LAN to Windows 10 share results in "empty" files
Copying files across a LAN to a Windows 10 shared folder results in the correct filename and extension being created, yet the resultant files are 0KB in size.
Investigation has revealed no apparent ...
- 101
4
votes
0
answers
4k
views
Is there a way to flush docker's embedded dns cache?
I'm working in an environment where sometimes the DNS server flakes out and tells you it can't resolve a host (eg. lookup of "github.com" fails). It's transient, and usually recovers fairly quickly. ...
- 213
2
votes
0
answers
107
views
systemd: not-running optional dependent service unexpected starts when parent restarted
I have 3 services:
ParentService, which provides the bulk of my application
DependentServiceA, which is strongly dependent on (i.e., is effectively useless without) ParentService running. When ...
- 121
0
votes
1
answer
61
views
Is there any reason apt-get upgrade would install new packages?
I recently ran apt-get update on a server, and the output suggested it was installing a bunch of new packages. What could be the reason for this? Should I be worried?
Reading package lists...
...
- 131
1
vote
0
answers
70
views
Configure two gateways on one LAN, use one normally. But fall back to the other when the first one fails. (Linux, Debian Jessie)
I'm trying to set up a LAN so that there is a main router that routes all outbound (0.0.0.0) traffic to the internet via a DSL link and also hands out IP addresses to clients on the network via DHCP.
...
0
votes
1
answer
2k
views
Linux files permissions denied on log files
I have installed nxlog to send my logs to a graylog server. It works fine, but I have a denied permission on the logs of my HIDS Ossec.
My process nxlog (launched by collector-sidecar) run as root :
...
- 1,305
1
vote
1
answer
1k
views
Does systemd-timesyncd need to listen to random UDP ports to work properly?
On Debian Jessie servers I see systemd-timesyncd listening on random UDP ports. Which is not the case on Debian Stretch hosts. By random I mean the port it listens to varies from server to server. ...
- 1,755
0
votes
1
answer
170
views
Debian Jessie RAID6 recovery mdadm
I have a Debian Jessie box that lost the RAID volume that had the OS, so I booted Live USB to try to recover the attached SAS controlled external drive bay which has my data RAID6 and it sees 3 of the ...
- 69
1
vote
1
answer
7k
views
SSL routines:ssl23_write:ssl handshake failure:s23_lib.c:177:
I have an openldap master and 2 openldap slaves. Using a non self-sign CA.
openldap master: name debian based on stretch
slapd 2.4.44+dfsg-5+d amd64
openssl 1.1.0f-3+deb9u1 amd64
openldap ...
1
vote
0
answers
315
views
booting debian image via PXE boot gives No common CD-ROM drive detected
I have created a custom debian image which should be autoinstall itself using preseed. When I load the image via Dell idrac virtual drive everything goes smoothly, however if I am trying to serve the ...
- 131
1
vote
2
answers
5k
views
kipmi0 process high cpu utilization
Running top on one of our debian 8 dedicated servers and noticed process kipmi0 utilizing 100% cpu. First off...does anyone know what this process is for, what it does, or what program is using it? Is ...
- 263
2
votes
1
answer
74
views
Expring package signing key
I have a whole bunch of remote locked down Debian boxes, I can not access them all ports are closed. They are quite numerous en spread all over the country, physical access would be a rather ...
- 55
0
votes
1
answer
488
views
Cannot mount NFS
I'd like to share a particular directory inside /home between a CentOS 7 and a Debian 8 machine. The CentOS 7 machine would work as NFS server and the debian as the client.
What I've done so far:
1)...
- 199
1
vote
3
answers
978
views
Htaccess Require expr Apache 2.4 works on osx-sierra not on debian-jessie
On my development machine osx-sierra / apache 2.4.10 (from brew) I have a restriction in a VirtualHost that allow access to /api/ without password, and all others pages need the password with this ...
- 31
0
votes
1
answer
889
views
Install python3 using pyenv on Debian Jessie
I am trying to upgrade Python 3 to the latest version on Debian Jessie, but I would like to keep system-installed Python 2 intact. By default, python command executes Python v2, and python3 command ...
- 141
1
vote
1
answer
7k
views
installation of Jenkins requires Java8 or later, but you are running 1.7.0
Since 2017, Jenkins dropped support for Java 7 and nowadays, using Java 8.
I'm trying to install Jenkins on a Debian Jessie (docker container), and I'm using the following procedure obtained via this ...
- 1,403
0
votes
1
answer
890
views
Munin master cannot trace data from munin node
I'm new to Munin, I followed the tutorial on digital ocean to install munin master on a debian, and then a munin-node on another server also under debian 8.9.
Munin master is working perfectly, from ...
- 199
0
votes
1
answer
902
views
apache2 stops when I logout from SSH
I am running Debian 8 Jessie and I have Apache 2.4.25-3+deb9u3 running under my login userid. When I login via SSH to the server and then log out, apache terminates. This also happens on Debian 9 ...
- 1
1
vote
1
answer
210
views
OpenVPN server routing for client-web-traffic through VPN
I have set up OpenVPN server and client as described in the official how to, using routing/tun devices. Point to point connection works. The client correctly routes all traffic into the VPN. Nothing ...
- 121