Questions tagged [forwarding]
Redirect a port to another one, used to access a computer from behind a firewall.
522
questions
0
votes
0
answers
28
views
Use squid to forward http(s) requests based on domainname
I have installed 5 LXC containers in Proxmox. Each container has a Apache2 webserver up and running inside, pointing to a registered domain.
So:
container1 points to example1.com and has a local ip ...
- 99
0
votes
1
answer
56
views
How to forward traffic through Linux box except requests to the box itself?
I have an Ubuntu box with IP forwarding enabled and a very simple iptables configuration to allow all packets from within the LAN to be forwarded:
echo 1 > /proc/sys/net/ipv4/ip_forward
/sbin/...
0
votes
1
answer
91
views
share two network interfaces on linux
I have a Linux PC (ubuntu 22.04) with a network layout as below:
Internet <-> Router <-> PC <-> edge device <-> Switch <-> APs <-> devices
And with two Lan ...
- 101
-2
votes
0
answers
23
views
Network adapter pass through
I am trying to have my laptop act as a pass through. Basically I want all the information packets that are coming into the computer via eth0 to be then pass back out eth1. I have been looking into ip ...
0
votes
0
answers
38
views
How can I allow all the subpaths after a domain in nginx proxy
Below is my configuration of nginx proxy . I have to allow all the subpaths after example.com like it should allow https://example.com/test , https://example.com/vaid. These subpath are already ...
0
votes
0
answers
20
views
Internet relay postfix with virtual alias and .forward
In a relay postfix for a domain, I am trying to configure so that each user indicates the e-mail destination address he wants in the .forward but as virtual_alias_maps is configured, it always takes ...
- 1
0
votes
2
answers
194
views
How to disable an Exchange 2016 mailbox and forward anything sent to it
fyi i would consider myself an exchange-noobie
Ok, the scenario is:
User left the company, but still gets a lot of mails sent to their mailbox. The AD User-password has been changed so they no longer ...
- 3
0
votes
0
answers
35
views
NGINX forwarding by 3rd level domain name
I have two local web apps which should be accessible from external network, but only one external IP. Both web apps use 443 port which can't be changed. So the task is to configure nginx in the way so ...
- 1
0
votes
1
answer
133
views
Can I tunnel all ports from remote server to 127.0.0.2 (for example), so work with it like with localhost
I have a remote server.
I started on remote server app that listen localhost only.
I want to tunnel this server to local ip like 127.0.0.2 and access this app through like I on remote server.
I need ...
0
votes
1
answer
180
views
Is the outgoing connection from a OpenVPN client to a LAN behind an OpenVPN server forwarded by the server kernel?
I've observed a somewhat strange behavior that I can't quite understand. So I set up an OpenVPN connection as shown in the graphic below. (It's a TUN and client-to-client setup).
My thoughts are ...
- 3
0
votes
0
answers
42
views
CentOS - nft route beetween two interfaces
I have a server with 2 network cards. I want to route from the 192.168.0.0/24 network to the 192.168.112.0/24 network and back the same way.
What am I doing wrong?
I have already set forwarding. See ...
- 1
0
votes
0
answers
37
views
Iptables Traffic forward
Would you please help me .
I have a 2 vps (Ubuntu)
I want to forward all traffic from one vps(1.1.1.1) to another (2.2.2.2) vps
except ssh port on A vps(1.1.1.1)
A server is 1.1.1.1
B server is 2.2.2....
- 1
-1
votes
1
answer
148
views
Access Internal IP by Sub-domains
I'm trying to access applications with internal IPs via subdomains from outside.
From my research, when it comes to http running apache, it seems feasible with a DNS server inside.
How to point sub-...
- 99
0
votes
0
answers
58
views
SSL for destination ip forwarding
I have two ubuntu VPS.
VPS_1: public IP = x.x.x.x
VPS_2: public iP = y.y.y.y
In VPS_1 I just only set a domain name for it and set iptables IP forwarding to VPS_2
(x.x.x.x:zzzzz >> y.y.y.y:zzzzz)...
- 11
0
votes
1
answer
276
views
Forward UDP broadcasts to another IP
I receive UDP broadcast packets on wlan0 on my Raspberry Pi which I'd like to forward to my desktop for analysis via eth0.
I'm running a modified WiFi firmware on a raspberrypi which sends UDP packets ...
- 119
0
votes
0
answers
359
views
Route SoftEther VPN traffic through another host on the network
Here is my setup:
Debian host 1:
eth0:
IP: 172.25.0.3
Subnet: 255.255.255.0
Gateway: 172.25.0.1
Running SoftEther VPN Server with its Virtual Hub. This Virtual Hub has Virtual NAT and Virtual DHCP, it ...
- 1
1
vote
1
answer
39
views
how to do remote access in virtualbox (configure as bridge) with ipv6
I installed Ubuntu Server 22.04 in a VirtualBox set up as Bridge.
ipv4: 192.168.55.226
ipv6: 2804:389:a09c:d31a:a00:27ff:feca:3cad
How do I remote access my virtualBox by ipv6?
2804:389:a09c:d31a:...
2
votes
1
answer
95
views
Ping device connected to host having LAN access
I've been playing back and forth routing games for a couple of days.
As it is quite hard to describe with words I made a diagram below:
What I want to achieve is being able to ping Rpi 4B from Rpi 3B ...
- 21
1
vote
1
answer
199
views
Routing HTTP/HTTPS traffic from one Linux server to another Linux server
The DNS for the domain.com is pointing at Server1 (it has a public ip address).
The webserver is running on Server 2 (no public IP address, but connected to Server1 via OVPN).
Is it possible to route ...
- 21
0
votes
1
answer
197
views
Is it possible to redirect (not forward) email in procmail?
I am using the following rule to forward email in .procmailrc
# in .procmailrc
* ^Subject.*something
! another@gmail.example
The filtering and forwarding part works as intended. However, the email ...
- 113
1
vote
0
answers
2k
views
WireGuard slow routing?
I've got a setup as depicted in the picture. The problem is catastrophic speed when using routing.
All WireGuard interfaces MTU = 1420.
(1), (2) are debian servers. (3) is windows machine.
The only ...
- 11
0
votes
0
answers
205
views
DNS Forwarding on Azure
I just bought a new .app domain from GoDaddy and want to forward all traffic to an existing site.
I tried doing this using GoDaddy’s name servers/admin portal but it’s not working and their support is ...
- 101
0
votes
0
answers
77
views
Linux: Edit Traffic In Transit with NetSED/IPTables
I'm trying to implement the solution to this question to edit packets coming from my server but I'm having trouble getting the IPTables rules correct.
I'm using a VPS with an external facing IP to ...
- 1
0
votes
0
answers
183
views
How to set up a secure forward proxy for a TCP port that is not HTTP or HTTPS?
I have a Mac Workstation, and I also have an EC2 instance (running Ubuntu Jammy) that we'll call my Proxy Box. I want my Mac Workstation to communicate out to the internet through my Proxy Box. ...
0
votes
0
answers
412
views
How can I make TPROXY option in iptables work when the destination proxy address is a non-local one?
I installed a TPROXY server in my router that forwards the traffic to a SOCKS5 server.
The router has the address 192.168.1.1 and my PC has the address 192.168.1.33. Also, I have a local bridge "...
- 113
0
votes
1
answer
907
views
How can I redirect DNS queries to 127.0.0.53:53 with iptables?
The problem is that I need to forward the incoming DNS query packets (from other computers) to 127.0.0.53 (not 127.0.0.1).
I tried to redirect the queries to 127.0.0.1, that worked fine, however it's ...
- 103
0
votes
0
answers
132
views
How to NAT TL-R480T+ with 2 ISP WAN ports connected
I have a TP-Link TL-R480T+ with 2 wan configured to load balance from 2 different ISP (a 4g modem and a DSL modem)
DHCP is disabeled on both modems with static ip of 193.168.2.254 for the 4g modem (...
1
vote
1
answer
198
views
Map and forward traffic from multiple PCs to multiple router with iptables
Is it possible to configure a linux server with iptables to do this?
PC (192.168.1.11) ===> (192.168.1.1) Linux Server (192.168.0.100) ===> Router1 (192.168.0.1)
PC (192.168.1.12) ===> (192....
- 13
0
votes
2
answers
181
views
Channeling IPv4 packets to IPv6 packets between interfaces
How do I route packets in my machine between interfaces (See yellow arrow). Eth0 receives IPv4 packets and I will like to channel it to Eth1 which will send IPv6 packets out.Image of dual stack ...
- 31
5
votes
1
answer
2k
views
Using iptables forwarding, while properly keeping source IP
I have a server running Wireguard (thus needing masquerade) and a container running on port 2525.
I have the following iptables rules:
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 25 -j DNAT --...
- 1,445
0
votes
0
answers
746
views
ip forwarding traffic from inside bridge network
I have the following network setup.
I am running a host with 2 vms. Each vm is running debian with cri-o, running some containers. The containers each have an ip address on the 10.200.0.0/24 subnet. ...
- 151
0
votes
1
answer
346
views
nginx displaying IP instead of domain with ghost
The current situation is as follows:
I have a domain at a specific provider (manitu.de)
I have a free tier VPS with Oracle
I want to set up a ghost blog on the oracle VPS that should be reachable via ...
- 1
5
votes
2
answers
3k
views
How does unbound handle multiple forwarders (forward-addr)?
According to https://nlnetlabs.nl/documentation/unbound/unbound.conf/ multiple forwarders can be configured with forward-addr
For the forward zone this list of nameservers is used to forward the
...
- 307
0
votes
0
answers
2k
views
Nginx Forward All Traffic on All Ports Except Port 80
I have a domain name, let's say example.com registered in Dynadot. I'm having it, along with subdomains www.example.com and cloud.example.com point to my IP address via A records. I have set up some ...
- 11
4
votes
1
answer
544
views
How to route IPv6 to the external interface?
I have purchased a VPS from IONOS. While they provide an IPv6 range 2a00:xxxx:xxxx:67::/64, they don't route it to the VPS itself, which is quite odd.
I wonder how I can achieve that. I have only 254 ...
- 1,505
0
votes
1
answer
1k
views
Forwarding port 80 traffic to multiple Web servers behind the firewall
I want to set up two web servers behind my firewall, both accessible from Internet browser clients using the normal port 80 and the URL. For example server1 www.abc.com and server2 www.def.com.
I'm ...
- 121
0
votes
1
answer
276
views
Two clients behind NAT on a single VPN connection, exting on two separate public IPs
I am looking for a way to forward outgoing traffic on separate IPv4 addresses for different clients connected through the same VPN tunnel, behind NAT.
Right now I am forwarding port 44158 from ...
0
votes
1
answer
285
views
Linux routing and port forwarding to a secondary network not working from WAN
I have a linux box acting as a router, with two interfaces
· eth0 - 192.168.0.61
· as0t0 - 172.27.224.1
Network 192.168.2.0/24 is accesible through as0t0, so I have this routes:
[root@192.168.0.61 ~]# ...
- 21
1
vote
0
answers
135
views
UDP port forwarding between virtual machines and docker composed network
currently I'm deploying a virtualized system and having a problem with forwarding of an udp port. I tried many tutorials, but something must be wrong and I don't know why the connection is refused all ...
- 111
0
votes
1
answer
613
views
postfix keep original sender ip on mail server delivery
I have Proxmox Mail Gateway facing internet with port 25.
When the email is recieved it is read and then forwarded to mail server.
On my mail server i see that all the emails are going from this PGM ...
- 13
-1
votes
1
answer
207
views
bind9: forward to local name server does not work when internet connection is down
I have the following setup:
A bind9 instance (referred as L below) on very limited hardware for resolving the names on my local networks.
It is an authoritative master for the zone home.mydomain.com. ...
- 103
1
vote
1
answer
1k
views
SSH over serial on Windows
I need to establish SSH connection over serial between Windows and Linux machine. I used socat on Linux side to do forwarding from uart to SSH server at localhost and it works fine.
Goal:
SSH client - ...
- 11
0
votes
1
answer
165
views
Connecting two nodes, dynamic tcp connections tunneling through a central server
Conceptual system in my mind of what i'm looking for:
Given two hosts (can be pcs) !
Both can be on dynamic network (dynamic ip)!
Both connect to the same central server to find each other! (in my ...
- 111
-1
votes
1
answer
133
views
Linux acting as a router - port-forwarding
Trying to setup a little AWS Box (Debian Linux) to act as a router taking public traffic (eth0 - single network interface) and redirecting it to a different public IP address, different ports and then ...
3
votes
0
answers
444
views
How to forward all incoming traffic to server A to server B and B returns it to A?
Suppose I have two servers: A and B. On both I have installed WireGuard.
On server A, wg0 is routed with IP 10.8.0.0/24 and on server B, wg0 is routed with IP 10.7.0.0/24.
Let's say server A's ...
- 49
0
votes
1
answer
387
views
Where does my bind config lookup dns entries? [closed]
Hy, I am in the course of learning how bind works. My goal is to have a local dns database so lookups in my lan are not going out to WAN.
I set up bind and didnt configure it as forwarding or caching ...
1
vote
0
answers
594
views
Syslog-ng service error on restart - syslog forward to Qradar
Hopefully my qeustion is in the right place.
I am currently trying to forward syslogs from an Ubuntu machine to a Qradar machine.
They're on the same network and i already managed to get Rsyslog to ...
4
votes
0
answers
880
views
Enable IPv6 IP forwarding on Windows by default
I'm running Wireguard on a Windows server, connected to multiple peers.
Peer A <-> Server <-> Peer B
In order to allow peers to ping each other (Peer A wants to reach Peer B), IP routing/...
- 41
0
votes
0
answers
1k
views
Forward traffic on port to another host with transparent proxy
I have a host with ip $HOST_IP which runs an HTTP server on port 8080. There is a transparent proxy server running on port 9000 on host with IP $PROXY_SERVICE_IP.
I'm trying to forward traffic from ...
- 101
0
votes
0
answers
140
views
may a linux client do prerouting with iptables
In our network I have 3 clients: A, B and C (connected to the same router).
I tried to redirect the traffic that arrive to B on port 4440 to C on port 4441 using iptables-legacy
simulating port ...
- 1