Questions tagged [hp]
HP (Hewlett-Packard) is a server and network equipment manufacturer. This is a generic tag to be used when discussing HP hardware or software with no more specific tag available - See the list in the main tag wiki.
1,519
questions
-1
votes
1
answer
219
views
iLO Interface connections of storage device in the server rack [closed]
I have a setup of 3 racks. In each there are 2 storage server (HP DL560 GEN8) and 4 compute server (HP DL360 GEN8) and 2 control planes (HP DL360 GEN8) and on top of the rack 2 patch panels. Above all ...
0
votes
2
answers
5k
views
HP ML350 Gen 8 - Can't install any OS
Good afternoon,
I recently got myself an HP ProLiant ML350 Gen 8 server (with 6x3TB configured in RAID 5).
I intend to use this server for file storage and light CAD work.
My issue is that I can't ...
0
votes
0
answers
158
views
FBWC capacitor pack hp Proliant DL380e Gen8 is broken down
I have a HP server Proliant DL380e Gen8 and it presented a problem that does not turn on the server and the system health LED gets flashing red quickly. After searching for information on the internet ...
3
votes
1
answer
792
views
Hp ssd p420i iops
i am creating an linux(centos7) nfs ssd datastore for vmwware esxi.
i am using an HP dl360e with p420i(1GB cache) and 6 x ssdsc2ba200g3p 200GB ssd 6g drivers(HP part number 730053-B21).
Using fio i ...
0
votes
1
answer
53
views
HP DL360 G6 raid50 - drive will fall soon
My server have problem with raid battery and in same time one drive have flag: Box 1 bay 3 predicted to fail soon. Also my server 2012 r2 is in mess, error: Online - Cannot get performance counter ...
0
votes
2
answers
3k
views
HP DL380e Gen8 NMI error
I have an HP DL380e Gen8 with P420 RAID controller it was powered on 24h per day at my previous job for 7 Months without any issues running a few VMs. After changing job I had the server at home for ...
0
votes
1
answer
421
views
HP ML350-G6 adding hot-swap drives
I have an HP Proliant ML350-G6 server with 3 600Gb hard drives on RAID5. It's running out of space so I'm adding 2 1Tb hard drives which I will configure as another volume on RAID1. My question is, do ...
0
votes
2
answers
461
views
How to secure this power cable on a network switch?
The device is an HP EI A5120 network switch. Is there a way to secure this power cable? Some other devices you can use a zip tie on these tabs. I searched but did not find a retention bracket from HP.
0
votes
1
answer
577
views
Remove logicaldrive in Smart Array P420i
i've a DL380p with Smart Array P420i. On this server we have some logicaldrives:
root@server:~# hpacucli ctrl all show config
Smart Array P420i in Slot 0 (Embedded) (sn: XXXXXXX)
array A (...
0
votes
1
answer
2k
views
CE error on in Memory log
I Have HP server (DL360-G7) and on it run Centos7 + cPanel.
in /var/log/message I see this error:
EDAC MC0: 5450 CE error on CPU#0Channel#1_DIMM#0 (channel:1 slot:0
I change RAMs and memory slots in ...
1
vote
0
answers
362
views
HP ProCurve 2910al dual personality ports media type
I got my hands on a few HP ProCurve 2910al switches and they have 4 dual-personality ports (either rj45 or SPF module), and I need to force the switch to use rj45.
The rj45 ports were working before, ...
0
votes
1
answer
458
views
HP Proliant Gen 8 moving from Windows 7 to Ubuntu Server 19.10 RAID Issues
I have been running Windows 7 on an HP Proliant Microserver Gen 8 for a good few years now, and as end of life comes closer I have decided to move to Linux.
I have 4 drives, two of which are in a ...
1
vote
1
answer
2k
views
LACP vs HP Trunk
Question on the performance and function of LACP vs HP "Trunk".
Example, I have two HP 2910al-48G switches connected via two runs of CAT6 cable. Is there any difference in performance between setting ...
0
votes
2
answers
2k
views
HP ML350 G6 will not power on
I have no lights on MB or back of power supply. I have replaced power supply and added a redundant power supply. I replaced PD board or backplane whatever you want to call it. Still same result. ...
0
votes
0
answers
4k
views
PAGE_FAULT_IN_NONPAGED_AREA (srv.sys) Windows Server 2012 r2
I have an HP proliant 380 gen9 server. The issue started with the server restarting it self on check the ilo logs i found out that we had smart battery failure so we replaced it. After turning it on ...
0
votes
1
answer
161
views
3PAR 7400 cli setup
Unfortunatelly we don't have a GUI so we use cli.
How to allocate physical disk space to free space?
I tried servicemag, admithw,admitpd cmd but freespace (showspace) is equal 0
3PAR01 cli% showsys
...
0
votes
1
answer
474
views
HP system health SNMP branch not available on Linux
I'm running an HP system with CentOS 7.
The SNMP info about the HDD health was not available. For example, the check_hp Nagios/Icinga plugin by Guenther Mair reports Compaq/HP Agent Check: no cpq/...
2
votes
0
answers
5k
views
How to identify which disk is failing in a HP ProLiant RAID controller?
I have a hard time identifying which drive is failing in my HP ProLiant DL360p Gen8. It has the following RAID controller: Smart Array P420i. I see tons of errors in dmesg:
[40425140.998750] sd 0:1:0:...
3
votes
1
answer
1k
views
VLAN not working on PFSense (SG 1100) with HP switch (HP E3500-48G-PoE yl)
Recently I bought a PFSense server (SG 1100) and a HP switch (HP E3500-48G-PoE yl). My idea is to create VLANs on the PFSense server, and use them on the connected HP switch.
I have found a ...
1
vote
1
answer
565
views
Using 8gb 2RX4 PC3- 10600R 1333MHZ DDR3 on DL380e Gen8 Server?
we are planning for a memory upgrade of our hp ProLiant 380e gen8 server.i've found a refurbish memory on amazon, since we have a limited budget we opted out to buy a refurbish units instead of a new ...
1
vote
1
answer
53
views
RAID upgrade - Can I power down individual disks to 'hot upgrade' an array?
I have a 4 disk RAID6 on an HP P420i (w/FBWC + battery module) that I need to upgrade with larger disks.
I was going to replace each disk in turn then wait for array rebuild until all 4 were replaced....
-2
votes
1
answer
402
views
Windows 2019 server image creation with driver injection [closed]
I need to create a vim file win2019server image for server deployments and I'd like to know how to inject the HP drivers to the image in the easiest way and which drivers I should inject? Does HP has ...
1
vote
2
answers
338
views
Newly added drives do not appear in the raid array list (hp server and ESXi)
I recently added two physical drives into my hp server (port 2). I also add them to the raid array list, but they don't appear in it:
and:
How can I add Disk 5,6 to the raid5 array list?
is ...
0
votes
1
answer
1k
views
Tagged ports on HP switch VLANs
wondering if somebody more experienced with HP procurve switching equipment can answer a pretty basic question for me. I'm trying to segment off 3 ports onto their own little network segment. I ...
0
votes
1
answer
54
views
VLANs and Trunks on HP Switches
long story short my goal is to configure 3 ports on an hp switch stack that can only communicate with each other, and nothing else on our lan. I created vlan 60 with 3 untagged ports. However, when I ...
0
votes
1
answer
320
views
Remove Raid Memory from HP DL380 G7
Hello,
i have a problem in HP G7 raid memory and need to remove it
i have Raid-5 array configured in this server but no cache configured
what will happen when remove the memory ? is the raid-5 ...
2
votes
1
answer
6k
views
Warning!!! Unable to mount the file system accessing HP SSA / Intelligent Provisioning HP ML310 Gen8 V2
I am trying to set up some RAID arrays on a HP ML310 gen8 v2 server. I enabled the raid controller pressing F9 and System Options, Embedded SATA Configurations and enabling Dynamic HP Smart Array ...
4
votes
2
answers
162
views
Does the HP DL20 gen10 support video redirection at all times with an advanced iLO license
We recently bought an HP DL20 gen10 through a reseller and it is missing the hardware iLO NIC. The HP quicksheet now shows iLO as an optional component despite us having bought the advanced iLO ...
3
votes
2
answers
5k
views
HP ProLiant DL360P G8 stuck on post
My HP ProLiant DL360P G8 started acting wierd after I started it up for the first time since last year. When it turns on it enters POST but gets stuck on "Memory and QPI Initialization Start" with ...
0
votes
1
answer
146
views
Configure sflow form HP A5500-24G-4SFP HI to reach ManageEngine Network Analyzer
I Just inherited an old windows server with windows 2008 and ManageEngine Network Analyzer, in this network I have an Hp switch.
The switch is a HP A5500-24G-4SFP HI.
How can I collect and send ...
6
votes
2
answers
3k
views
HP ProLiant DL380 G7 LFF - Is every SAS HDD compatible?
I am just starting to get into server hardware, so please bear with me.
I bought a HP ProLiant DL380 Generation 7 with a LFF drive cage and I do not know which SAS drives are actually compatible. ...
-1
votes
1
answer
178
views
DL180 G6 server suddenly loses access to SSD datastore on ESXi 6.0 [closed]
I've currently got a HP ProLiant DL180 G6 server. It originally came with a Smart Array P410i raid card, which I used to create a bunch of RAID0 disks (one SSD for my ESXi datastore and a couple of ...
0
votes
1
answer
216
views
sshd service down + remote console HP/CentOS 6
I have HP server running CentOS 6, where sshd service was unable to start after restarting it, so I lost access to the server via ssh.
iLO service is working but not the console, regardless through ...
2
votes
2
answers
28k
views
HP Proliant DL360 G7 Wont Boot from USB
Whenever I try to boot from a USB stick I get the Red Screen Of Death. I've tried to load VMWare, Windows and Linux from a bootable USB but nothing.
0
votes
1
answer
792
views
Starting servers after UPS shutdown when input power is restored
I have a rather simple UPS (Powerwalker VI series) that does not seem to have any sophisticated built-in configuration options. When the power is cut and servers detecting that event shut down after a ...
4
votes
0
answers
3k
views
HP iLO CPQCIDRV not found when module is loaded
I'm trying to connect to the iLO interface on my HP ProLiant Server. I'm running Ubuntu 18.04 LTS
I've been following instructions including
https://downloads.linux.hpe.com/SDR/project/mcp/
https://...
2
votes
0
answers
510
views
Get resource usage over HP ilo SNMP
I am trying to get info about cpu and memory utilization on HP gen 8 and gen 7 servers but it seems there is no option for this.
Is there any known OiD for this matter?
0
votes
1
answer
102
views
HP Smart Array - Swapping drives in RAID set to upgrade
I have a HP DL360 G7, with Smart Array controller that has 2x RAID sets (RAID 10). Host OS is VMWare ESX. The 2nd RAID set has 4x 10k 600GB Midline drives that are to be upgrade to 15k 600GB ...
2
votes
1
answer
2k
views
What tool is available for managing the P410i raid controller?
I have a HP server with a HP P410i raid controller installed. From linux (centos 7 at the moment), how can I manage the raid controller from the OS (not from the BIOS, please)? For example, I'm ...
2
votes
1
answer
498
views
RAID 10 Configured in Smart Array Administrator but after install centos 7 show all disks
I have an HP ProLiant DL320e Gen8 with 4 disks. I have configured the disks as a single RAID10 array in the HP Smart Array Administrator. After configuring Smart Array Administrator I can see 1 ...
1
vote
2
answers
802
views
HP DL580 Gen8 - not booting after CPU upgrade
We bought several used DL580 Gen8 recently. One of them (let's call it type A) had four E7-4830v2 installed and the other (let's call it type B) had four E7-4880v2 installed. Everything worked fine ...
2
votes
1
answer
1k
views
ML350 G6 drive not detected
I have an ML350 G6 that I have bought some new drives (HP P/N: 507129-004) for. According to the drive specs these are compatible with the G6 but the SAS controller (p410i) is not detecting them. The ...
3
votes
1
answer
2k
views
Smart Array P420i controller replacement
I have two identical servers with Smart Array P420i
One server has 4 physical drives, which form 2 logical drives (2 + 2 raid 1)
Second server also has its raid configuration with two physical drives ...
3
votes
0
answers
510
views
SAS Expanders and Hp Smart Array HBA mode
I've recently purchased an HP DL360p G8 with a Smart Array P420i 1GB storage controller.
As I'm using FreeNas, I've switched the controler to HBA mode.
I was planning to buy an HP SAS expander, this ...
3
votes
1
answer
2k
views
Hp Smart Array P420i HBA mode activity LEDs
I've purchased an HP DL360p G8 with a Smart Array P420i 1GB storage controller.
As I'm using FreeNas, I've switched the controler to HBA mode, however now the G8 caddies (original ones) don't show ...
1
vote
1
answer
8k
views
HPE ProLiant DL380 Gen9 - Smart Storage Battery and controller issue
My server machine is showing a couple of errors, I have read on HPE site and article says to replace the battery. Please someone guide in this regard.
However, my all four SAS drives indicating red ...
2
votes
1
answer
2k
views
HP DL 360G7 and HP smartarray P410i RAID 1 troubleshooting
This should be an old story, but it happened just couple weeks ago.
System is as in the topic, with two disks in RAID1, one day one of the disks fell off. I ordered new disks for future use and ...
3
votes
1
answer
284
views
c7000 - 1GB Ethernet Pass-Thru
I cant get the BL460c Gen 8 to work with the 1GB Ethernet Pass-Thru non of the ports are mapped or lighting up.
1
vote
2
answers
219
views
3par OS location
As a complete 3par Newbie I have a simple question about the OS of the Storage-System. Is the OS on a 3par stored on it's controllers or on Disks like in some EMC-Models. When I have an empty 3par-...
1
vote
2
answers
4k
views
RAM compatibility for HPE servers
I ordered a HPE ProLiant DL325 G10 server. It comes with a AMD EPYC 7401P and 32GB (2x16GB) DDR4 2666MT/s 2Rx8 RDIMMs. I'd like to add more RAM to it. I'm wondering if I can buy non-HPE branded RAM ...