Questions tagged [mikrotik]
Latvian manufacturer of computer networking equipment, known for the Linux-based operating system known as MikroTik RouterOS.
325
questions
2
votes
1
answer
4k
views
MikroTik GRE over IPSec
I'm trying to establish a GRE over IPSec tunnel between two MikroTik devices. Everything seems to work yet when I sniff the WAN interface I can clearly see the GRE packets which theoretically I ...
1
vote
0
answers
312
views
Forward all traffic from interface to internal IP address
We've had a new SIP trunk setup and connected to our Mikrotik router, I need to forward all traffic coming from int ETH2 to an internal IP address of a VM (VM Host is connected to Eth5) for our ...
0
votes
1
answer
2k
views
Multiple Public IP's in One Network
I have Internet connection from ISP and got Static IP pool of 8 IP's with 5 Useful IP's...
Now I want to establish following network
ISP -> Mikrotik Router -> Switch ===> Web Servers & LAN
Now ...
0
votes
0
answers
341
views
Mikrotik rb2011 static routing between 2 sites
I have 2 Mikrotik RB2011 routers. I need for Device on 192.168.3.10 to be able to communicate with device 192.168.2.10 for UDP traffic on port 50000
With the below config I am not able to ping ...
2
votes
2
answers
3k
views
Internal network can't see mailserver on public ip address Mikrotik
Please esxcuse my english as it is not my home language
I have mailserver in my network behind a mikrotik router and firewall
the problem that I'm having is that my mailserver is on a public ip ...
0
votes
2
answers
12k
views
How control bandwidth with mikrotik queue
I have a mikrotik router and i want to limit the speed of wlan users. I create a queue for target = wlan and set the limit downloa and upload = 64k, but when i test it, this seems not working ...
0
votes
1
answer
4k
views
syslog-ng logs storing with hostname year date
I have syslog-ng on Ubuntu 12.4 to store mikrotik router logs. At a moment its working fine and log gets stored in a file i set.
Howto add store logs in a file/folder according to source IP so that ...
0
votes
0
answers
868
views
IPSEC passes only ICMP
I have FreeBSD and Mikrotik with IP 1.1.1.1 and 2.2.2.2. Local subnets are 192.168.1.0/24 and 192.168.2.0/24. Firewall is disabled for testing.
I am bringing up gre tunnel between them.
FreeBSD:
...
1
vote
1
answer
7k
views
Site-to-site tunnel using two MikroTik routers where one endpoint is behind NAT (LTE modem)
I would like to interconnect two offices where one has a public static IP address (main office) and the second one is behind NAT (no public IP) because there is just an LTE modem.
I am able to create ...
0
votes
2
answers
6k
views
Mikrotik: any way to nat one public IP to another public IP?
Is there a way to do a simple task, NAT from one public IP and specific port to another public IP and another port, reason to do this is that 2nd IP is blocked by our client's ISP, and the 1st IP (on ...
0
votes
0
answers
1k
views
Issue with Fail2ban and Mikrotik Firewall
OS: CentOS 7.1
At my organization we are currently assessing using Fail2ban with the firewall on our Mikrotik router. I want Fail2ban to communicate any IP flagged as banned to the Mikrotik firewall,...
1
vote
2
answers
3k
views
windows not accepting static dns from mikrotik
I have mikrotik on which I set up static DNS entries for my network. Form linuxes everything works correctly even from one of windows computers (windows 7) but from other windows computers I can't ...
-5
votes
1
answer
88
views
Mirotik : Client from interface 1 cant access client from interface 2
I have a mikrotik here.
Both interface 1 and 2 have same network (10.10.30.0) and dhcp pool.
I can ping any client on interface 1 from mikrotik and also any client on interface 2. But I cant use to ...
3
votes
1
answer
4k
views
Logging NAT mappings on a Mikrotik router
I am looking for suggestions on how to configure a Mikrotik router to log NAT session setup and ideally teardown. However, setup only is sufficient for my immediate needs.
I found a method to log ...
3
votes
1
answer
10k
views
How to setup an encrypted L2-Tunnel using MikroTik Routers?
What I would like to achieve
I want to securely spread an existing internal subnet over multiple buildings. That means that I have two locations with virtual machines that need to be within the same ...
2
votes
1
answer
222
views
Prioritize traffic going to different interfaces
For example, we have regular clients sitting on wlan1 and Bittorrent client sitting on eth2. They access Internet via eth1. Bittorrent download traffic should be given lowest priority. So, that ...
1
vote
1
answer
1k
views
MikroTik - Traffic flow (Netflow) Octets Counter wrap
I am using Traffic Flow with pmacct (nfacct) to do IP Accounting.
I've noticed that if a flow exceeds ~4GBytes in less than a minute (which is my active-flow-timeout) the exported flow Octets counter ...
0
votes
1
answer
7k
views
MikroTik Configuration - Add a Public Wireless Router (internet only) to Office LAN
Goal
Provide internet access for employees' personal devices without providing access to the internal network.
Equipment
Netgear WNDR4500v2: Wireless router intended for the guest network (has ...
0
votes
1
answer
2k
views
Couldn't add New Bridge NAT Rule - ip matchers valid only for ip ethernet protocol
I am following this tutorial to set up port forwarding. However, when I attempt to apply my rule, I get the above error message.
Here is the rule that I am trying to add: see this image
1
vote
0
answers
1k
views
Build IPv6 over IPv4 tunnel between server and home network
On one side I have an Ubuntu server in a data center that has IPv6 connectivity. The eth0 interface has a public IPv4 and also a public IPv6 /48. From that server I can ping IPv6 addresses OK.
On the ...
7
votes
2
answers
19k
views
Mikrotik: how to properly setup IPV6 routing/dhcp server
I have the following configuration in my network:
ISP Router <- eth1 -> Mikrotik Router <- eth2-5 -> Internal network
My ISP router receives a /64 IPV6 block that is dynamic, changing ...
5
votes
0
answers
2k
views
IPv6 only server PXE provisioning
We are currently preparing for IPv6 only network deployment and struggle to find a unique server identification.
In our previous setup, we used mac address as servers primary identification. We were ...
4
votes
2
answers
37k
views
Mikrotik simple queue, Limiting range of IPs
I'm using a Mikrtotik RB201UiAS to manage my network.
To avoid creating simple queues for every IP i have created queues for ranges of IPs.
Target: 172.16.2.0/25
Dst: ether1
...
4
votes
1
answer
17k
views
How to get OpenVPN Client (Mikrotik RouterOS) <-> OpenVPN server (Debian/Linux) setup to work
I have some issues with making MT to work with OpenVPN server (Debian). I can make successfull connection to OVPN server, but traffic is not routed through OVPN server. Here is my configuration.
...
-2
votes
1
answer
78
views
How to define a complex user usage rules in Mikrotik? [closed]
I want to define a 50 MB limit for each user in Mikrotik and after it is used, have a speed limit of 8 kbps speed for unlimited time. Furthermore, I would like this policy to be applied on a daily ...
0
votes
2
answers
2k
views
Mikrotik massively add static routes
I'm wondering of it is possible to add static routes to Mikrotik massively. For example, I have list of Facebook servers which I need to route and how can I add them in terminal by one or 2 commands ...
2
votes
3
answers
15k
views
Remote access Mikrotik with no public IP
I have a Mikrotik behind a broadband router, I want to access the Mikrotik using web or winbox but the problems are;
1- Mikrotik could access internet but has no public IP
2- Using VPN is forbidden ...
1
vote
1
answer
9k
views
Mikrotik switched VLAN configuration
With Routerboard 450G I want to configure the 5 Ethernet ports as follows:
ether1: vlan3, untagged
ether2: vlan1, untagged
ether3: vlan2, untagged
ether4: vlan2, untagged
ether5: vlan1-vlan3, tagged
...
2
votes
1
answer
3k
views
Mikrotik dst-nat timeout
I have installed a brand new Mikrotik RB2011UiAS-2HnD-IN in our Office.
Everything is working except port forwarding :(
I have disabled all other rules and filters but nothing helped .
I am able to ...
3
votes
0
answers
227
views
Only able to ping WiFi AP for about 60 seconds, then is full access after
I have 3 x Mikrotik RB951Ui-2HnD router board (RB) running 6.31 with wlan1 bridged with ethernet 2.
STP is disabled on the RB bridge (protocol mode set to None).
I have a HP ProCurve 2520-24-PoE ...
0
votes
1
answer
235
views
Mikrotik main IP
On mikrotik (CCR-1009, v6.0), I use 2 interfaces : eth1 for WAN and eth8 for LAN.
On LAN interface 2 IPs: 192.168.22.1/24 as main and 10.10.10.1/24 for routing pptp from WAN. I also have some pptp/...
0
votes
1
answer
2k
views
Setting up mikrotik router with native IPv6 with only a single /64 block
I am at a colo provider that supplies a single IPv6 /64 block.
The goal was to route the provided /64 of IPv6 addresses to the hosts behind the Mikrotik running RouterOS 6.24.
Some Mikrotik ...
-2
votes
1
answer
8k
views
Monitoring visit sites via Mikrotik [closed]
Tell me please. Can I monitor the sites visited by mikrotik. There is a router through which there are 10 members. Can I see the headlines of sites they visit?
1
vote
1
answer
6k
views
Setting ToS/QoS for VoIP on Mikrotik
I have a Mikrotik router which looks like iptables. I need to setup QoS to ensure VoIP phones get top traffic priority. How do I know what ToS to use and how would I get it? I searched and can't seem ...
0
votes
1
answer
15k
views
MIKROTIK - Two LANs connected with switch
I have a very simple network. I have two LAN networks (192.168.2.0/24 and 192.168.3.0/24) connected via a router at each site and the routers are connected via a switch.
http://postimg.org/image/...
1
vote
1
answer
7k
views
ipsec vpn up, but no traffic, no ping
I've set up a VPN between my mikrotik router and Google Cloud Platform VPN.
According to the Green check next to peer IP on the VPN Console, VPN is up, but all pings are timed out.
> /ip ipsec ...
0
votes
0
answers
18k
views
Mikrotik OpenVPN Server dropping OpenVPN Connections - Connection reset, restarting [0]
I was able to connect from within my local network connection but from remote site locations the connection looks to be dropping. Could this be a possible firewall issue? I see a connection but it ...
0
votes
1
answer
663
views
Can't access VPN server through ADSL modem
We have mikrotik router in our office which takes ethernet WAN(RJ45 plug) as input and connect LAN network. We switched to ADSL connection from fibernet connection. Now With ADSL connection I can't ...
-1
votes
2
answers
672
views
Load balancing ip conflict in Mikrotik
I have a rb433 connected in pcc to 3 wifi wan routers that all give 192.168.1.1
cant access these routers to change the dhcp
Any sugestions to avoid conflict?
config img here http://postimg.org/...
-3
votes
1
answer
301
views
3 internet line in a single network
i'm going to bond 3 internet line in a single network.
i'm using Mikrotik RB750 router, I configured this router like this:
/ip firewall mangle
add chain=input in-interface=WAN2 action=mark-...
1
vote
1
answer
14k
views
Mikrotik RB951G-2HnD - wi-fi drops or hangs connections [closed]
We've bought Mikrotik RB951G-2HnD in our company (about 20 - 25 clients in network) with 50 Mbps channel from the ISP-side. Mikrotik Wireless drops connection or getting very low speed often as more ...
-3
votes
1
answer
5k
views
How to install mikrotik routerOS on my computer [closed]
I got a mikrotik routerboard 950G and i downloaded netinstall v6.8 but i cannot install the routerOS into my computer. Can anybody help me out?
-2
votes
2
answers
10k
views
Block "Web proxy Online" and VPN in mikrotik
hello to everyone,
i'm working in a big municipality and they told me to block some pages..
i used to setup Web proxy in mikrotik to redirect some pages to a specified destination ..
but, some ...
-2
votes
1
answer
15k
views
Mikrotik all port block, except port 80 [closed]
I like to block all of my mikrotik router port to get rid of hackers and only open port 80. So please someone advise me, how I can block all of my incoming and outgoing mikrotik port, accept port 80.
0
votes
1
answer
293
views
Managing VPN-based users/VLAN access to a test environment
I'm involved in the setup of a demo/user lab environment comprising several racks of server kit. The idea is that potential hardware/software customers can be given a VPN account that will allow them ...
0
votes
1
answer
43k
views
MikroTik - can't access webfig from external / can't SSH into router from external ip
Ok,
here's the deal.
Let's say that my public facing IP is 10.0.01.
I can't webfig into 10.0.01 from external and can't SSH into mikrotik router from external IP.
I can do it if I am physically ...
2
votes
2
answers
9k
views
Does exist a curl equivalent command in routeros?
Just starting with routeros and after searching the official docs just fetch appears
I need to do a POST request to REST API but I cannot find any curl like command. Is it possible to install curl ...
4
votes
2
answers
12k
views
Use Mikrotik as a switch and route subnets through another router
I've got the following network configuration:
Comtrend 5813 FTTH Router, connected to WAN, let's say in 192.168.50.x (being .1 router's address) and a DHCP server active, giving addresses from .150 ...
0
votes
1
answer
2k
views
Joining two networks over internet with same ip range
We have two offices in a single Windows 2003 domain and sharing same IP range (no overlapping). Every office has its Microtik router as gateway. Thing is, first office has a solid wired internet ...
2
votes
1
answer
4k
views
Mikrotik RB2011U vlanning
I am having trouble getting port based vlanning/trunking working on a Mikrotik RB2011U.
I have been following the guide located here:
http://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Example_-...