Questions tagged [static-ip]
A static IP address is assigned to a device on a permanent basis. The IP address is not expected to change frequently or at all. This addressing method is commonly used for servers and other devices for which the address must be well-known.
322
questions
0
votes
0
answers
45
views
Firewall is blocking incoming responses in Google Cloud Function
My Google Cloud Function is connected with a Static IP Address. It is making API calls to Adobe Reactor API and Jira API. Jira API requires a static IP address. Adobe Reactor API doesn't necessarily ...
0
votes
1
answer
79
views
Managing static and dynamic ip for shh and downloads
Actually I am using Ubuntu 22.04 with two ethernet as one with static ip address and 10 Mbps speed, whereas other ethernet has dynamic ip and 600 Mbps speed.
I want to use ssh in static ethernet and ...
1
vote
1
answer
920
views
Ubuntu Static Public IP not working (22.04)
We are trying to install a Machine with Ubuntu Server 22.04 in a Data Centre. The DC Host told us these public IP Addresses:
IPv4 Net: XXX.XXX.XXX.160/29
Gateway: XXX.XXX.XXX.161
(The X's are the ...
0
votes
0
answers
55
views
Setting the same secondary public IP on multiple servers
The question concerns floating public IP's. I'm trying to set up a failover mechanism in the simplest way possible. Are there any hidden downsides to configuring the same secondary static public IP on ...
0
votes
2
answers
109
views
How to separate two IP Pools for the single LAN network
I want to create two IP pools in my private network. I want to do this so that the IP cameras in my network are separated and the data devices(PC's, AP's, IP Phones) are separated. But I'm doing all ...
1
vote
1
answer
1k
views
Netplan- How to configure a static IPv6-address and SLACC
I’m facing a situation where I need to configure an interface with both a private static IPv6 address and SLAAC (Stateless Address Autoconfiguration) addresses. The reason behind this requirement is ...
0
votes
0
answers
154
views
How to provide direct server SSH access using public static ip without internal ip
I have a /29 static public ip pool. 5 ip are usable. I assigned one static ip to my router, and i don't want to use this ip for route to external server ip.
We are doing home server hosting business ...
0
votes
2
answers
4k
views
Set static IP address in OpenSUSE
I need to set (static) the IP/Mask/Gateway of interface dev eth1 on my OpenSUSE server. Currently, the output of
ip address show dev eth1 is:
I need to change it to 10.121.196.252/25 with a gateway ...
0
votes
1
answer
1k
views
How to set a static IP for client on OpenVPN server with duplicate-cn?
To set static IP for clients with distinct certs, we can set static IP for clients following jdmorei's answer. However, If duplicate-cn is set on the server side, so that many clients share the same ...
0
votes
1
answer
987
views
Static IPv6 LAN address while using SLAAC for global unicast
I have some IPv6 nodes in two IPv6 networks. There is a single IPv6 router, link-local to all nodes.
The router sends out router advertisements(RA) containing two prefixes for the two networks. The ...
1
vote
1
answer
107
views
My debian server have a dynamic ip address. Have one program like a vpn to give [closed]
I have a problem with a debian server. I need put a website to work, but my desktop doesn't have a Static IP, only a dynamic IP. The internet provider creat a lot of dificulties to upgrade my internet ...
0
votes
0
answers
31
views
Can't reach my static ip from outside of country
I want to access my cctv cameras from outside of country
everything looks fine on the cctv network like ports and static ip but i cant check my cameras on ivms-4500 application . please help
thank you
0
votes
0
answers
398
views
How to create a VM with a specific external IP or IP range?
I have some problems with some google cloud IP ranges, they are blocked in my country, so I cannot connect to my VM if the instance is on those external IP ranges. I have tried reserving IP addresses ...
-1
votes
2
answers
537
views
DNS shows wrong IP addresses on different machines
I have a very weird problem when I try to resolve my domain ( wiki.stroeersocialpublishing.de ) with a static IP.
On some machines the DNS shows the correct IP ( 99.81.177.226 ) and on other machines ...
0
votes
1
answer
1k
views
how to know device IP is static or dhcp on linux dhcp server [closed]
My system is Linux. I use udhcpd tool to build a dhcp server.
I want to know what method(static or dhcp) is used for connected device on my linux server
How can I do? do have any cmd can reach this ...
0
votes
0
answers
702
views
Route Docker outside communication through specific route
My host has 2 IP addresses. One main (management) IP and one that is used for services and whitelisted. The service IP has no gateway but goes through the gateway of the management IP.
My netplan ...
-3
votes
1
answer
166
views
Is it possible to save DHCP reservations to disk so they can be restored after rebooting Linksys AX5400 router [closed]
I'm not a network administrator, but I play one at home. I have this Linksys AX5400 router on which I have configured some DHCP reserved addresses. When I need to reboot the router, I would like to be ...
0
votes
1
answer
869
views
Will updating Azure static public IP from Basic to Standard SKU reassign a new IP address?
as per the title. I have an Azure VM with a Basic SKU static public IP and considering to upgrade it to the standard. However, I do not wish the IP to change as it's being whitelisted in various of ...
0
votes
1
answer
26
views
Setting up a static IP, but for whatever reason when I load the openvpn file to a router it doesn't load the static IP I set
(Static IP is not one reserved by the access server)
Pics here: https://i.sstatic.net/XsZxi.jpg
0
votes
1
answer
1k
views
Can't connect container with bridge to the internet using networkd
i have a server running Ubuntu 20.04 LTS connected through one physical ethernet interface to the internet. My prodiver assigned me a static primary IP4 (i will use A.A.A.A here for this IP), so my ...
1
vote
1
answer
347
views
How to configure NetBSD to accept vlan tagged packets
I am trying to set up a NetBSD install with a static ip that is on a vlan. The router is set up to only allow other vlans to access this vlan, but not the other way around. So the NetBSD install ...
0
votes
1
answer
17k
views
Netplan - Error in network definition: Updated definition changes device type
I'm trying to set a static ip on Ubuntu.
ip a:
1: lo <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
...
2: epn2s0: <NO-CARRIER,BROADCAST,MULTICAST> ...
-1
votes
2
answers
3k
views
Access router admin page with static IP
I have a static IP and can access my servers from the outside world by port mapping.
For e.g.: A service running on the 192.168.1.98:8080, can be accessed by going to {Static_IP}:8080, if I have ...
1
vote
0
answers
142
views
Need to use 3rd party router, Static IPs wont transfer
I am on a business connection with Spectrum, I have 5 static IPs assigned but they only seem to work when I plug in their own very low end router. The problem is, their router is too low end to handle ...
0
votes
1
answer
2k
views
How to get a static IP address for outbound requests in AWS?
We are in an integration process and the company is asking for whitelisted static IP addresses. The suggested solution by AWS is to create new ECS that uses new subnets. Is it possible to change ...
2
votes
1
answer
433
views
Cannot SSH to github.com after changing to static IP
I've been using github.com for a long time, but just had my ISP switch my home internet to a static IP and now I can't SSH to github.
What happens with SSH?
The id_ed25519 key has just been re-...
1
vote
0
answers
382
views
Establish KVM bridge with static IP
I would like to establish a virtual machine (KVM) on Ubuntu Server and configure bridge networking in order to connect to the VM via static IP. I want to connect to the VM directly via SSH (bypassing ...
0
votes
3
answers
1k
views
Configuring multiple Ethernet connections in a linux server
I have the following topology
.───────────────.
┌──────────────────┐ ...
1
vote
2
answers
3k
views
What is the best way to setup a network printer in an enterprise environment?
As far as I know, printers should get a static IP (with MAC and IP binding) assigned from the DHCP Server (in this case a router) so that the IP is taken from the DHCP IP pool.
An alternative to just ...
0
votes
2
answers
565
views
Can't connect to servers that have a static IP in a dynamic network
In my network, you get an automatically assigned IP address. Friday I set up 3 debian servers to instead use the static addresses 192.168.0.177, .188 and .237. Today I powercycled them and I can no ...
0
votes
1
answer
41
views
How do I hook up a business modem with 6 ports to a switched network? [closed]
I have a small business modem that has 6 ports on it, each being a static IP.
My network has grown however to the point where I have more than 6 devices, so I am moving to use a switch, which has ...
0
votes
1
answer
5k
views
How to run DHCPcd on interface eth1 only [closed]
I have several network interfaces - eth0, eth1.
ETH0 is connected to the isolated local network (with switch) and has 2 static IP addresses. It was configured using /etc/network/interfaces file and ...
0
votes
1
answer
234
views
VPS Resolv And Static IP
I have a vps server hosted with an internationally, very well-known hosting provider, and oddly enough they seem disturbingly incapable of troubleshooting their own system.
There are two specific ...
-1
votes
1
answer
920
views
Asus OpenVPN Server Static IP
I follow Static IPs for Asus router VPN clients.
Still unable to let the client get static ip
My method of executing openvpn is sudo openvpn --config /etc/openvpn/client/client.ovpn
SSH connect to ...
0
votes
0
answers
311
views
Nextcloud Static IP address slowing down the website
I installed Nextcloud on my Ubuntu 20.04 VM. Everything is working nicely, webpage is fast, the server gets the network credentials from DHCP server.
I want to change the IP address of my Nextcloud ...
4
votes
1
answer
5k
views
Can't access static external IP for Google Cloud Run instance - followed guides (Router, Subnet, NAT, VPC, etc)
I'm trying to assign an external static IP address to our Cloud Run instance, so that I can use it with websockets (which I've read require a static IP in order to work, versus the self-appointed/load-...
0
votes
0
answers
155
views
IP-CONFIG: no response | eth0 hardware address DHCP RARP
I have debian 10 in a xenserver 7.0 vm with static ip and keeps trying dhcp. Already removed some packages that could be interfering, but must still have something installed.
the post initialization ...
0
votes
1
answer
256
views
Getting more than 65535 ports using multiple static IP's on AWS
I run a service that needs more than 65535 ports and I use an AWS VPS
I was thinking what if i attach more static IP's to that VPS, would each of those IP's get 65535 ports whilst being connected to ...
0
votes
3
answers
3k
views
Debian 10 keeps asking for dhcp IP even with static ip configuration
This is my interfaces file:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/...
0
votes
1
answer
491
views
Impossible to change subnet in Ubuntu
I need a little help, I had setup a VPN server on my Ubuntu Server 20.04 (with GUI) (Actually, I’m using Ubuntu Desktop as server) and to avoid conflicts with the default gateways of other routers ...
0
votes
1
answer
296
views
Autoscaling with Google Compute Engine with Static IP pointing to domain name
I am looking to add autoscaling to my Google Compute Engine via the instructions I have found here: https://cloud.google.com/compute/docs/autoscaler
My original Compute Engine instance has a static ip ...
1
vote
1
answer
9k
views
Tunneling a Public IP using OpenVPN
I'm having a bit of difficulty tunneling a Public IP to a remote VPS using OpenVPN. I have a Linux server with a block of 32 Public IP Addresses 192.0.2.160/27, named Server 1, along with one other ...
0
votes
1
answer
887
views
HAProxy + OpenVPN retain real IP of client
Setup
HAProxy tcp mode
with OpenVPN servers as backend, all on the same machine
Problem
OpenVPN shows localhost IP instead of real IP of client in status
Question
Is there any method to retain the ...
-3
votes
1
answer
2k
views
Should I assign my VPN a static IP or use a DHCP reservation?
I'm setting up a Raspberry Pi with OpenVPN on my home network. The router for my network is a NetGear Orbi.
In the router's configuration I'm able to assign a static internal IP address (say 10.0.1....
1
vote
1
answer
179
views
Setting static ip causes network delays
I am running into a problem after setting static IP on my linux systems (Ubuntu and Raspbian).
If i set static ip, i experience 5-10 second initial hangs when interacting with it by SSH or http after ...
-3
votes
1
answer
80
views
Changing router WAN IP Address [closed]
Hi I don't really understand how WAN IPs work, can someone explain how I can change my address to a static one. How can I know if the address I want is taken? How can I see what addresses are ...
10
votes
1
answer
3k
views
Can I simply buy dedicated IP addresses from any website and assign them to my server?
As the question suggests, is it possible for me to buy/get dedicated/static IP addresses and connect them to my OpenVPN server so I can assign each IP address to a client?
0
votes
1
answer
1k
views
How do I assign multiple dedicated IPs to my Openvpn server's clients?
I have a server (CentOS 8) with Openvpn 2.4 setup on it, and I want to assign dedicated IPs to each of my clients, so they always get the same dedicated IP each time they log in, How can I approach ...
0
votes
2
answers
3k
views
Unable to reach host with static ip and gateway is vlan - Debian 10
I have been trying to get static ip working on a Debian 10 install. The server is to operate in a VLAN separate from any other network. The VLAN id according to the router interface is 3. The router ...
1
vote
1
answer
3k
views
Run nginx in static IP of server
Sorry for my bad English, I can't explain it well.
I have a VPS with Windows Server 2012 with Nginx and run a Node server at port 4000 and React client at port 3000.
In remote desktop website run at ...