MagnaVis
  • Member for 7 years, 9 months
  • Last seen more than a week ago
Comcast Business Gatway cg3000dcr kills VPN connections after about 3mb of transfer
Accepted answer
3 votes

What about putting it in bridged mode, and using your own router to see if the problem still happens. My guess some kind of problem in the routing side of things, persistent NAT? Anyway, just about no ...

View answer
Nagios not starting after boot
Accepted answer
2 votes

This seems to be a problem with init.d script's formatting. This solved the issue for me: First, edit the nagios init.d script: nano /etc/init.d/nagios Replace the block that starts and ends like ...

View answer
Ola Hallengren's SQL Backup to Network Location not working
Accepted answer
2 votes

The issue has been resolved. I created a new network share location, giving it very open permissions (everyone:Full control), and the backup works to that location. Whatever the issue is, it must be ...

View answer
WIN 2012 DNS Issue
1 votes

I see this is answered already, but I wanted to follow up. This is a best practices issue. Run the BPA for DNS, and you'll see that it's no longer recommended to have the loopback address as the first ...

View answer
Why are my VMWare 5 virtual machines not booting when converted over to Microsoft Hyper-V 2012r2?
1 votes

EDIT: See this question, which also discusses some of this: Hyper-V VM doesn't boot off SCSI hard drive I would check your drive configuration in Hyper-V. Maybe, if there's more than one drive, ...

View answer
Raid 5-Disk Faulty
1 votes

I agree with Jim, but would caution you before doing a swap, to update your RAID Controller firmware. The Open Manage Console should tell you want controller you have, and if it's no the latest ...

View answer
Windows 2012 DHCP server with 2 NICs
1 votes

Just assign your IP addresses to your NICs, the DHCP server will hand out addresses in the proper scope based on which NIC it receives the requests from. Here's the TechNet article on relay agents: ...

View answer
CentOS Linux: One server inaccessible via SSH, while others are
Accepted answer
1 votes

Is Server2 on the same LAN as Server1 and Server2? If not, it's probably a network issue. I would put an SSH Client in the same network, on the same switch, as Server2 and work back from there. I ...

View answer
How to prevent folders from roaming with a profile?
0 votes

One other place that server likes to enable roaming at is in the user account properties, profile tab. Make sure these fields aren't populated.

View answer
Connecting to Windows Server 2012 R2 console session with RDP
0 votes

I may misunderstand, but this is fairly easy. You should remote to the server using your account, on whatever session you want. Then, from command prompt (on the remote server) or PS, enter: mstsc /...

View answer
pagefile and disk space monitoring on server 2012
Accepted answer
0 votes

This may not be the best answer, but I would configure some monitoring platform like Nagios to watch the servers. Stuff like this happens all the time, and if this is a client, you need to know there'...

View answer
block all packets in windows 7 (so nothing appears in wireshark)? Can anything locally installed do it?
0 votes

I think the setting your looking for is here: After setting this, outbound will default block, and rules will be allow instead of block.

View answer